# Window motors and fuel tank **URL:** \ **Category:** For Sale\ **Created:** [January 3, 2005, 10:13pm UTC](https://59plymouth.net/t/window-motors-and-fuel-tank/373 "2005-01-03T22:13:22Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![Faulkner](https://59plymouth.net/user_avatar/59plymouth.net/faulkner/32/21944_2.png) [@Faulkner](https://59plymouth.net/u/Faulkner)\ **Post date:** [January 4, 2005, 2:06am UTC](https://59plymouth.net/t/window-motors-and-fuel-tank/373/2 "2005-01-04T02:06:53Z")
Hi Chuck, Welcome aboard! > [@59 plymouth sport fury](#): > > Hi > Im new here,I am restoring a 59 SF.I could use some tech help and some supplier info.I took the window motor out and when i did the housing came apart.The springs were damaged in the process.Anyone know who rebuilds these motors?Or where i can get new springs and how do i get the armature back in between the brusheswith the springs in? You can read all about my debacle with power window motors here: > [@repairing a power window motor](http://59plymouth.net/t/repairing-a-power-window-motor/154/1): > > I asked about finding a source for a replacement motor in this thread… [59plymouth.net/t/delco-electric-window-motor-coupling-and-drive-cable/109/1](http://59plymouth.net/t/delco-electric-window-motor-coupling-and-drive-cable/109/1) Alas, no nibbles, at least, no inexpensive ones. Last night I decided to remove the star gear on the end of the shaft, by gently tapping down on the shaft with two splints of wood under the gear; not only did the gear slide off, but the housing separated easily while I was tapping! (The long bolts had been removed.) Apart from some inside rust, I… There’s a guy in FL who rebuilds them, but when I found out what he wanted for them, I persisted with fixing mine… As I recall, I mounted the brush backing plate onto the armature before I dropped the assembly into the can – and then, tilted the armature so that I could screw the plate to the can. I imagine you could find springs at a hardware or auto supply store, if yours can’t be salvaged. Let me know if you want the FL contact, and I’ll try to dig it up. > [@59 plymouth sport fury](#): > > Unfortunatly, when load the car on to the trailer the fuel tank was damaged. Anyone have or know about a replacement,or what years fit the 59 SF. Hmmm… Can’t help here. Anybody on the forum? > [@59 plymouth sport fury](#): > > Also im in need of chrome pieces (1) just below drivers window and meets door panel,(2) chrome strip across trunk lid. > Thanks > Chuck 😃 I’ve got a lead of a trunk lid stainless piece for my car. When I get it, I’ll consider selling you mine. It’s more work than I can handle, but it’s probably restorable. Others on the group can probably help you with your other stainless needs. **_It would help to have pix!!_** Consider sending some, and we’ll give you your own webpage. In any event – glad you’ve signed up! Dan --- _[View the full topic](https://59plymouth.net/t/window-motors-and-fuel-tank/373)._