# Universal Coupler

**URL:** <https://59plymouth.net/t/universal-coupler/2490>\
**Category:** Wanted\
**Created:** [August 20, 2014, 7:12pm UTC](https://59plymouth.net/t/universal-coupler/2490 "2014-08-20T19:12:46Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![eroomas](https://59plymouth.net/user_avatar/59plymouth.net/eroomas/32/53_2.png) [@eroomas](https://59plymouth.net/u/eroomas)\
**Post date:** [August 20, 2014, 7:12pm UTC](https://59plymouth.net/t/universal-coupler/2490/1 "2014-08-20T19:12:46Z")

</div>

Does anybody know where I might be able to get a Universal Coupler for a power steering gear box?

---

<div class="post-metadata">

**Author:** ![Denver\_59\_Fin\_Conver](https://59plymouth.net/user_avatar/59plymouth.net/denver_59_fin_conver/32/24_2.png) [@Denver\_59\_Fin\_Conver](https://59plymouth.net/u/Denver_59_Fin_Conver)\
**Post date:** [August 21, 2014, 4:53am UTC](https://59plymouth.net/t/universal-coupler/2490/2 "2014-08-21T04:53:06Z")

</div>

Coupler for the high pressure side of the pump hose going to the steering box.

Just trying to figure out what part you are looking for… Do you have a picture of the old part and where it goes? ❓  
  
  
John Q.

---

<div class="post-metadata">

**Author:** ![Dick\_Koch](https://59plymouth.net/user_avatar/59plymouth.net/dick_koch/32/19_2.png) [@Dick\_Koch](https://59plymouth.net/u/Dick_Koch)\
**Post date:** [August 21, 2014, 1:04pm UTC](https://59plymouth.net/t/universal-coupler/2490/3 "2014-08-21T13:04:32Z")

</div>

Andy - Unless someone has changed the power steering box in your car the 59’s do not use a “rag joint” or universal joint. The 59’s have a slotted (male/female) joint just above the steering box but inside the steering shaft cover down at the bottom, that joint has a rubber insulator sleeve that fits in the slot with a pin that holds it together. Your parts book should show the setup, that is, if you have one.  
It’s a real pain to get to it. First you have to take off the steering wheel and all the horn stuff to get the shaft out, next you have to loosen the collar down at the steering box so you can slide the steering shaft cover up and off the steering shaft. You have to disconnect the electric connections that go into that cover. Make sure you keep track of the black horn wire as it is seperate. Remove the pin and replace the rubber insulator. Oh and then there is a rubber boot that fits onto the cover with a brass ground strap in it. You can get those parts from Gary Goers in Kallispeil, Montana. Click on the thread below  
Dick.

> [@New 59's!](http://59plymouth.net/t/new-59s/82/1):
>
> Hi Dan, here’s a sport fury i found. Maybe they know more about it? There is a “contact us” there. Here it is: [http://www.collectablecars.co.nz/gallery/ply\_fury\_59.php](http://www.collectablecars.co.nz/gallery/ply_fury_59.php) I will try to find more 59’s!

---

<div class="post-metadata">

**Author:** ![Dick\_Koch](https://59plymouth.net/user_avatar/59plymouth.net/dick_koch/32/19_2.png) [@Dick\_Koch](https://59plymouth.net/u/Dick_Koch)\
**Post date:** [August 21, 2014, 1:05pm UTC](https://59plymouth.net/t/universal-coupler/2490/4 "2014-08-21T13:05:38Z")

</div>

Andy - There’s three pages to the above attachment.  
Dick.

---

<div class="post-metadata">

**Author:** ![eroomas](https://59plymouth.net/user_avatar/59plymouth.net/eroomas/32/53_2.png) [@eroomas](https://59plymouth.net/u/eroomas)\
**Post date:** [August 21, 2014, 3:02pm UTC](https://59plymouth.net/t/universal-coupler/2490/5 "2014-08-21T15:02:20Z")

</div>

> [@Dick Koch](#):
>
> Andy - Unless someone has changed the power steering box in your car the 59’s do not use a “rag joint” or universal joint. The 59’s have a slotted (male/female) joint just above the steering box but inside the steering shaft cover down at the bottom, that joint has a rubber insulator sleeve that fits in the slot with a pin that holds it together. Your parts book should show the setup, that is, if you have one.  
> It’s a real pain to get to it. First you have to take off the steering wheel and all the horn stuff to get the shaft out, next you have to loosen the collar down at the steering box so you can slide the steering shaft cover up and off the steering shaft. You have to disconnect the electric connections that go into that cover. Make sure you keep track of the black horn wire as it is seperate. Remove the pin and replace the rubber insulator. Oh and then there is a rubber boot that fits onto the cover with a brass ground strap in it. You can get those parts from Gary Goers in Kallispeil, Montana. Click on the thread below  
> Dick.
> 
> [New 59's!](http://59plymouth.net/t/new-59s/82/1)

Thanks Dick, I’m gonna look online for a parts book, that will be very helpful. I also need info on the differential, mine needs a new bearing and or a rebuild.

---

<div class="post-metadata">

**Author:** ![Dick\_Koch](https://59plymouth.net/user_avatar/59plymouth.net/dick_koch/32/19_2.png) [@Dick\_Koch](https://59plymouth.net/u/Dick_Koch)\
**Post date:** [August 21, 2014, 5:25pm UTC](https://59plymouth.net/t/universal-coupler/2490/6 "2014-08-21T17:25:55Z")

</div>

Andy - [www.garygoers.net](http://www.garygoers.net).  
Dick.

---

<div class="post-metadata">

**Author:** ![Dick\_Koch](https://59plymouth.net/user_avatar/59plymouth.net/dick_koch/32/19_2.png) [@Dick\_Koch](https://59plymouth.net/u/Dick_Koch)\
**Post date:** [August 21, 2014, 5:30pm UTC](https://59plymouth.net/t/universal-coupler/2490/7 "2014-08-21T17:30:23Z")

</div>

Andy - This is better, click on “Catalog” in ver fine print.  
Dick

[http://www.garygoers.com/](http://www.garygoers.com/)

---

<div class="post-metadata">

**Author:** ![eroomas](https://59plymouth.net/user_avatar/59plymouth.net/eroomas/32/53_2.png) [@eroomas](https://59plymouth.net/u/eroomas)\
**Post date:** [August 21, 2014, 5:39pm UTC](https://59plymouth.net/t/universal-coupler/2490/8 "2014-08-21T17:39:56Z")

</div>

> [@Dick Koch](#):
>
> Andy - This is better, click on “Catalog” in ver fine print.  
> Dick
> 
> [http://www.garygoers.com/](http://www.garygoers.com/)

Thanks Dick
