# Seat Belts-Swivel Seats
**URL:** https://59plymouth.net/t/seat-belts-swivel-seats/2355
**Category:** How To
**Created:** [December 24, 2013, 4:13pm UTC](https://59plymouth.net/t/seat-belts-swivel-seats/2355 "2013-12-24T16:13:05Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@safety6](https://59plymouth.net/u/safety6)
#### Post date: [December 24, 2013, 4:13pm UTC](https://59plymouth.net/t/seat-belts-swivel-seats/2355/1 "2013-12-24T16:13:05Z")
Would like to install lap belts on driver & passenger side swivel seats, in my 1959 Sport Fury. Has anyone done this or are there any suggestions?
Appreciate any shared experience/tips.
Regards,
safety6
---
### Author:  [@Dick\_Koch](https://59plymouth.net/u/Dick_Koch)
#### Post date: [December 24, 2013, 5:52pm UTC](https://59plymouth.net/t/seat-belts-swivel-seats/2355/2 "2013-12-24T17:52:51Z")
I have done it to two SF with swivel seats. Nothing special to do except putemin.
Merry Christmas.
Dick.
---
### Author:  [@Denver\_59\_Fin\_Conver](https://59plymouth.net/u/Denver_59_Fin_Conver)
#### Post date: [December 24, 2013, 7:15pm UTC](https://59plymouth.net/t/seat-belts-swivel-seats/2355/3 "2013-12-24T19:15:57Z")
Like Mr. Koch, I have them installed in my car. Make sure you allow enough room to go around your waist when seated.
When you do install them on the floor, use a large diameter fender washer on the underside of the floors to give sufficient resistance on any pulling forces should there be a need for a severe braking episode. Just don’t want the bolted floor end part to pull thru the metal floor in case of a hard brake or God forbid and accident. Grade 5 or Grade 8 bolts are recommended for strength. I will take a pic of my mounting area for you today before the day gets away from me.
I have the seat pulled all the way up to the front for a good view. Do a trial fit to make sure you have enough belt lenght in your seat positioning,
John Q.
