# E-Brake Kit from Russell Automotive

**URL:** https://59plymouth.net/t/e-brake-kit-from-russell-automotive/4853
**Category:** Vendors
**Created:** [March 27, 2026, 9:18pm UTC](https://59plymouth.net/t/e-brake-kit-from-russell-automotive/4853 "2026-03-27T21:18:27Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![Faulkner](https://59plymouth.net/user_avatar/59plymouth.net/faulkner/32/21944_2.png) [@Faulkner](https://59plymouth.net/u/Faulkner)
#### Post date: [March 27, 2026, 9:18pm UTC](https://59plymouth.net/t/e-brake-kit-from-russell-automotive/4853/1 "2026-03-27T21:18:27Z")

</div>

**Why didn’t I think of this?!?** What a clever idea - an emergency brake kit that uses the factory rear axle, and connects to your existing E-brake cable. An elegant solution to a nagging problem for many MoPar enthusiasts. Read all about it in the attached brochure!

[e.brake.flyer.pdf](https://59plymouth.net/uploads/short-url/eTAizeIDnqIKLrjSy4RYGIXFGyc.pdf) (133.3 KB)

 ![e-brake](https://59plymouth.net/uploads/default/original/3X/c/7/c764cdb8e203bea267b9a0faebec247393a70045.jpeg)  
_(Facebook banner)_

---

<div class="post-metadata">

### Author: ![Faulkner](https://59plymouth.net/user_avatar/59plymouth.net/faulkner/32/21944_2.png) [@Faulkner](https://59plymouth.net/u/Faulkner)
#### Post date: [April 2, 2026, 10:38pm UTC](https://59plymouth.net/t/e-brake-kit-from-russell-automotive/4853/2 "2026-04-02T22:38:13Z")

</div>

Folks have asked to see pictures of the E-Brake Kit installed - here are some provided by Russ Nardi:

 ![35.ply.e-brake](https://59plymouth.net/uploads/default/original/3X/b/d/bd1ff9a11efefcc7c5080bcb1643c84882d41bf4.jpeg)  
 ![38.ply.e-brake](https://59plymouth.net/uploads/default/original/3X/f/e/fe17cbcd9a7c4ea3ca81e4e4f6b5569e78529eab.jpeg)

Russ writes:

> Attached are a few photos but they cannot show all the nuances of how the kit functions and there are two kits available - one for 1933-1937 and one for 1938-59 due to the location of the factory e-brake handle.

 ![33-37 cable brkt](https://59plymouth.net/uploads/default/original/3X/e/9/e99a1e1c04d6a4b9d020abda25d31bbdf65614fb.jpeg)  
 ![Fig.14](https://59plymouth.net/uploads/default/original/3X/a/c/ac0a6c8f8cacd7aa0a0256b2c19b7230563deeac.jpeg)

> The brackets attached to the transmission that mount the cable…

 ![IMG_6252](https://59plymouth.net/uploads/default/original/3X/1/5/154d4e1312f1672209e19856e40d781e7addb775.jpeg)  
 ![IMG_6259](https://59plymouth.net/uploads/default/original/3X/5/6/56b03e19122d34a2d07a3f96d3103687c5ff4752.jpeg)

> and then the unit that mates to the factory handle cable.

I reattach here the brochure from earlier in the thread for ordering information.

[e.brake.flyer.pdf](https://59plymouth.net/uploads/short-url/eTAizeIDnqIKLrjSy4RYGIXFGyc.pdf) (133.3 KB)

---

<div class="post-metadata">

### Author: ![eroomas](https://59plymouth.net/user_avatar/59plymouth.net/eroomas/32/53_2.png) [@eroomas](https://59plymouth.net/u/eroomas)
#### Post date: [July 4, 2026, 4:57pm UTC](https://59plymouth.net/t/e-brake-kit-from-russell-automotive/4853/3 "2026-07-04T16:57:29Z")

</div>

I think I need one of these

---

<div class="post-metadata">

### Author: ![Faulkner](https://59plymouth.net/user_avatar/59plymouth.net/faulkner/32/21944_2.png) [@Faulkner](https://59plymouth.net/u/Faulkner)
#### Post date: [July 4, 2026, 5:17pm UTC](https://59plymouth.net/t/e-brake-kit-from-russell-automotive/4853/4 "2026-07-04T17:17:12Z")

</div>

email Russell, @eroomas Andrew - [russells.adapters@gmail.com](mailto:russells.adapters@gmail.com). Most of what he has made are for earlier cars, he would need to fabricate something different for a Forward Look era pumpkin.