# Darryl Gaspardone pix

**URL:** <https://59plymouth.net/t/darryl-gaspardone-pix/1936>\
**Category:** Show Your Ride\
**Created:** [August 22, 2011, 6:50pm UTC](https://59plymouth.net/t/darryl-gaspardone-pix/1936 "2011-08-22T18:50:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Faulkner](https://59plymouth.net/user_avatar/59plymouth.net/faulkner/32/21944_2.png) [@Faulkner](https://59plymouth.net/u/Faulkner)\
**Post date:** [August 22, 2011, 6:50pm UTC](https://59plymouth.net/t/darryl-gaspardone-pix/1936/1 "2011-08-22T18:50:02Z")

</div>

Got these recently from Darryl:

> [@Darryl](#):
>
> here is the motor and tranny back in her,318 bored out 20 thou over with new pistons and rings and bearings etc.just saving up for doing the heads.so many peices scattered around the shop and been apart for way to long.
> 
> ![motor rebuild.jpg](https://59plymouth.net/uploads/default/original/2X/6/68a2a71d6c443ca54ad374a66055aa92779475e4.jpeg)  
> i kinda had a lul working on the old buggy for a few years but it is time to get back at her again.the challenge is trying to remember where i put all the parts i took off?
> 
> ![103.jpg](https://59plymouth.net/uploads/default/original/2X/a/a156e1fc61dfc925981232dd45efd6f9c83e7887.jpeg)  
> ![104.jpg](https://59plymouth.net/uploads/default/original/2X/0/014431e43a36d4c7c4ae036455fb6500f5ffa892.jpeg)

---

<div class="post-metadata">

**Author:** ![Denver\_59\_Fin\_Conver](https://59plymouth.net/user_avatar/59plymouth.net/denver_59_fin_conver/32/24_2.png) [@Denver\_59\_Fin\_Conver](https://59plymouth.net/u/Denver_59_Fin_Conver)\
**Post date:** [August 23, 2011, 4:36am UTC](https://59plymouth.net/t/darryl-gaspardone-pix/1936/2 "2011-08-23T04:36:39Z")

</div>

Looking good! Had to repair the same sections on my car. You weld better then me!

Keep the pictures coming!

John Q.