# Altering stainless trim

**URL:** https://59plymouth.net/t/altering-stainless-trim/1358
**Category:** How To
**Created:** [August 9, 2009, 8:24pm UTC](https://59plymouth.net/t/altering-stainless-trim/1358 "2009-08-09T20:24:58Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![rogerh](https://59plymouth.net/user_avatar/59plymouth.net/rogerh/32/9_2.png) [@rogerh](https://59plymouth.net/u/rogerh)
#### Post date: [August 9, 2009, 8:24pm UTC](https://59plymouth.net/t/altering-stainless-trim/1358/1 "2009-08-09T20:24:58Z")

</div>

Over the years, several people have asked me if I have a nice trunklip stainless trimpiece to sell. I didn’t. And they are not so easy to find out there.  
Well, recently I was looking at some SF side trim I have. One piece was flattened pretty good at one end. I thought to myself- “maybe I can cut this down and convert it to a trunklip trim”  
Holding the piece next to my trunklip piece on my car…I made some marks with a Sharpie, and using a hacksaw and tinsnips, I cut the trim, and peened over the ends. The resulting trim is pretty good, if I say so myself. Anybody want or need one? I will gladly sell it for $20-

 ![PICT0002.JPG](https://59plymouth.net/uploads/default/original/2X/b/b234bc29fde04e9c4e8db08bf7c305e2921a2b03.jpeg)  
 ![PICT0004.JPG](https://59plymouth.net/uploads/default/original/2X/d/d393712f41c29006572f4c49f19f1ef3bd893cee.jpeg)  
 ![PICT0005.JPG](https://59plymouth.net/uploads/default/original/2X/a/a7c34aea9dbcb45cee1590e1795eb8359a57031b.jpeg)

---

<div class="post-metadata">

### Author: ![rogerh](https://59plymouth.net/user_avatar/59plymouth.net/rogerh/32/9_2.png) [@rogerh](https://59plymouth.net/u/rogerh)
#### Post date: [August 28, 2009, 8:38pm UTC](https://59plymouth.net/t/altering-stainless-trim/1358/2 "2009-08-28T20:38:04Z")

</div>

sold it for $20-