# 59 Belvedere driver side trim/pushbutton knobs/dual antennas

**URL:** https://59plymouth.net/t/59-belvedere-driver-side-trim-pushbutton-knobs-dual-antennas/2374
**Category:** Wanted
**Created:** [February 2, 2014, 4:06am UTC](https://59plymouth.net/t/59-belvedere-driver-side-trim-pushbutton-knobs-dual-antennas/2374 "2014-02-02T04:06:13Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![hawkeye999](https://59plymouth.net/letter_avatar_proxy/v4/letter/h/ea5d25/32.png) [@hawkeye999](https://59plymouth.net/u/hawkeye999)
#### Post date: [February 2, 2014, 4:06am UTC](https://59plymouth.net/t/59-belvedere-driver-side-trim-pushbutton-knobs-dual-antennas/2374/1 "2014-02-02T04:06:13Z")

</div>

I’m restoring a 1959 Belvedere 4-door sedan and am looking for:

1. Driver side exterior trim. I would consider buying the whole side if you have it, but here is what I am lacking:

- Upper stainless trim  
front fender  
front door
- Middle trim (stamped anodized aluminum)  
front fender  
front door
- Lower stainless trim  
front fender

1. Powerflight push button caps/knobs (all 4 R,N,D,L)

2. Dual rear antennas 😆

3. Radio on/off stem

Thanks much,

59plymouth59

---

<div class="post-metadata">

### Author: ![Dick\_Koch](https://59plymouth.net/user_avatar/59plymouth.net/dick_koch/32/19_2.png) [@Dick\_Koch](https://59plymouth.net/u/Dick_Koch)
#### Post date: [February 2, 2014, 2:07pm UTC](https://59plymouth.net/t/59-belvedere-driver-side-trim-pushbutton-knobs-dual-antennas/2374/2 "2014-02-02T14:07:17Z")

</div>

Hawkeye - I probably have most of your trim needs, have to sort it out and get back to you.  
Dick

---

<div class="post-metadata">

### Author: ![hawkeye999](https://59plymouth.net/letter_avatar_proxy/v4/letter/h/ea5d25/32.png) [@hawkeye999](https://59plymouth.net/u/hawkeye999)
#### Post date: [February 3, 2014, 12:35pm UTC](https://59plymouth.net/t/59-belvedere-driver-side-trim-pushbutton-knobs-dual-antennas/2374/3 "2014-02-03T12:35:42Z")

</div>

That would be great, Dick. I rechecked the driver side again and all of the lower stainless trim I have is in good shape. I would like to replace all 4 pieces of the upper stainless trim (but could live with the rear fender piece I already have). As for the middle anodized aluminum, I think I only need the rear door piece (some jackass cut one end at a notched angle for some reason, but at least I can use that one to cut the small knife-shaped piece I need for the front fender). My front door piece should be OK, but let me know if you have a replacement for that as well.

Thanks again,

Jim