# 3D print file for central dome light lens

**URL:** https://59plymouth.net/t/3d-print-file-for-central-dome-light-lens/4879
**Category:** How To
**Created:** [June 11, 2026, 9:00pm UTC](https://59plymouth.net/t/3d-print-file-for-central-dome-light-lens/4879 "2026-06-11T21:00:57Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![Faulkner](https://59plymouth.net/user_avatar/59plymouth.net/faulkner/32/21944_2.png) [@Faulkner](https://59plymouth.net/u/Faulkner)
#### Post date: [June 11, 2026, 9:00pm UTC](https://59plymouth.net/t/3d-print-file-for-central-dome-light-lens/4879/1 "2026-06-11T21:00:57Z")

</div>

If your '59 Plymouth has a central dome light (i.e., not along the roof rail) and you need a lens… Well, print your own, courtesy of @morten.larsen ! You’ll find the STL file attached. Morten has also made an extrusion tool for the “side to side” headliner bows in his Suburban - I don’t know if it can be adapted for “front to back” bows, or not. (The latter are commercially available from [Vans Auto](https://vansauto.com/product/57-59-plymouth-headliner-plastic-molding-chrome-65-2440144/).) Morten is also working on 3D printing of the bow ends.

Thanks, Morten!

 ![2026-06-05 18.56.16](https://59plymouth.net/uploads/default/original/3X/8/3/83b56c7849a214ec3e2ad7b610a793ff9f5bb158.jpeg)  
 ![20260309164724](https://59plymouth.net/uploads/default/original/3X/e/1/e1d5f2fb7da3fe2cefbbb497613cabd79a9698c4.jpeg)  
 ![20260605084615](https://59plymouth.net/uploads/default/original/3X/d/8/d882edd01dbc5578b64ffd019fba1ad6f1a4c2e0.jpeg)  
 ![2026-06-05 18.55.16](https://59plymouth.net/uploads/default/original/3X/5/4/544d8f555a04bfe40206e8bd689dc2c10d9de0c4.jpeg)  
 ![2026-06-05 18.56.24](https://59plymouth.net/uploads/default/original/3X/9/6/960f23300b30185561f30ed85635c3f6f508e42c.jpeg)

[Interior light dome MKL.STL](https://59plymouth.net/uploads/short-url/oKXLDWjhdWn2QqYZYKB0OFcjgcd.STL) (839.7 KB)

---

<div class="post-metadata">

### Author: ![nollenberger](https://59plymouth.net/user_avatar/59plymouth.net/nollenberger/32/21942_2.png) [@nollenberger](https://59plymouth.net/u/nollenberger)
#### Post date: [June 15, 2026, 8:56pm UTC](https://59plymouth.net/t/3d-print-file-for-central-dome-light-lens/4879/2 "2026-06-15T20:56:03Z")

</div>

where do i get that crown moldings?

---

<div class="post-metadata">

### Author: ![Faulkner](https://59plymouth.net/user_avatar/59plymouth.net/faulkner/32/21944_2.png) [@Faulkner](https://59plymouth.net/u/Faulkner)
#### Post date: [June 15, 2026, 9:11pm UTC](https://59plymouth.net/t/3d-print-file-for-central-dome-light-lens/4879/3 "2026-06-15T21:11:53Z")

</div>

Crown moldings? Do you mean, the strips that hold up the headliner panels?

You have a Belvedere, Michael @nollenberger - correct? Then you need the front-to-back strips. You can get them from Vans Auto, as I say above - here’s the link again: [57-59 Plymouth Headliner Plastic Molding Chrome 65 Inches - EACH 2440144 - Vans Auto](https://vansauto.com/product/57-59-plymouth-headliner-plastic-molding-chrome-65-2440144/)

Dan

---

<div class="post-metadata">

### Author: ![nollenberger](https://59plymouth.net/user_avatar/59plymouth.net/nollenberger/32/21942_2.png) [@nollenberger](https://59plymouth.net/u/nollenberger)
#### Post date: [June 15, 2026, 9:40pm UTC](https://59plymouth.net/t/3d-print-file-for-central-dome-light-lens/4879/4 "2026-06-15T21:40:19Z")

</div>

thanks foor that … yes i have a belvedere is it 100 $ for each or is it a set?

---

<div class="post-metadata">

### Author: ![Faulkner](https://59plymouth.net/user_avatar/59plymouth.net/faulkner/32/21944_2.png) [@Faulkner](https://59plymouth.net/u/Faulkner)
#### Post date: [June 16, 2026, 2:35am UTC](https://59plymouth.net/t/3d-print-file-for-central-dome-light-lens/4879/5 "2026-06-16T02:35:47Z")

</div>

It’s $100 each, Michael @nollenberger - pricey, I know.