'59 Plymouth Forum

OK, this is the third try. This is the routing of the YNZ harness l installed in my Convertible. It's made specifically for a 59 Plymouth. Good luck with the Painless harness. The YNZ is routed thru the bottom of the DS kick panel into a channel under the sill plate then into the bottom of the DS ...

Ricky, good luck with that, just make sure you don't burn your fingers when squeezing the heated vinyl tubing. heh, heh.

Thanks Art, you are so kind. My knowledge is accumulated knowledge and experience of all the participants of this sight, my thanks goes to them including you.

Yes, it would still look good without the fourth layer. That was my thought as l was putting it on. Either way it still looks pretty good.

20250604_091623.jpg

The clear resin sections of my Sport Fury steering wheel turned yellow with age, cracked and fell off leaving a pristine like new chrome ring. Over the years trying to make it presentable l covered the ring with hose and laced covers. The last effort was a seventeen inch red ...

Dan - You the man.

PUSHBUTTON PRICE REDUCTION:
For 1959 Plymouth with Torqueflyte automatic 3 speed transmission.

Full set: Drive, Neutral, Reverse, Second and First.
$160.00 set. Free shipping lower 48.

Individual buttons:
$ 40.00 ea. Free shipping lower 48.

Phone 561-587-2787 wife's phone.

Best way to contact ...

I think Rickey is right a 3/8" wide belt should do it... Tighten so there is 3/8 to 1/2 " movement on belt between waterpump pully and alternator pully.

Knowing working under the dash is only a job for a contortionist l figured having to remove the steering column jacket and steering shaft would be as difficult when l replaced the power steering box so since the front seat is only held in with four nuts l elicited the help of my son and removed the ...

Hi Mark - Thanks for the heads up of Hemmings 2023 calander. I have ordered two copies.

Art - l changed all my dash bulbs from #57 to LED's including the three you are talking about with no trouble at all. I suggest a small blade of some kind to pry the socket out of the hole. Just let me say do not wait until you are 86 to change your power steering box. Been fighting it for 3 days ...

Could be the v belt itself, you should carry a spare anyway. I have saved at least two Chevy's with my spare belt.

Single groove pully on crankshaft. I guess no power steering. The belt is tightened correctly when you push down in the middle of a span and it moves approx. 1/2". Dan can you post the video of my engine running while driving the alternator, AC compressor and water pump.
Thanks,
Dick.

60 Desoto with helper spring kit installed on shocks.

Schlaag, Regarding your original shocks w/o helper springs, you can buy a helper spring kit from NAPA or any parts house and install them on your shocks. I did that on my 60 Desotos original shocks and it made a huge difference. It would bottom out with two passengers in the rear but not anymore.