Faulkner gets a Redo



Works in progress. Or, whose progress has been completed!
User avatar
Mark Merritt
Posts: 451
Joined: Sun Sep 23, 2012 5:57 pm

Re: Faulkner gets a Redo

Post by Mark Merritt » Sat Dec 01, 2018 1:41 pm

Dan; I know the feeling. When I got mine to body shop for paint it did stay inside, but I got a lot of yada yada as well. Body shop owner is A friend of my nephew and was always bugging me to paint the Plymouth. So at my nephews wedding we set the deal, Long story short it was weeks and then months of nothing. I would check up about every week (was supposed to be done in A month) stop in and touch base. My car was turning into A garbage can, taco bell wrappers,coffee cups,used sand paper,bondo lids/cans,body part boxes,etc.etc.etc. I made A surprise visit and took it back home. Not saying you are going to have problems but stay involved, remember, they work for you !!!! Nothing done and no respect will never fly with me. Just my thoughts. P.S. A shop about A mile from my home did it with NO PROBLEMS. Mark
ONLY ORIGINAL ONCE!!!!!

User avatar
Faulkner
Posts: 3712
Joined: Sun Mar 07, 2004 6:59 pm
Location: Upper Darby, PA
Contact:

Re: Faulkner gets a Redo

Post by Faulkner » Sun Dec 02, 2018 6:57 pm

When putting on the front brakes, the shop broke a retaining spring - so Monday morning, I'll be calling Bernbaum/Kanter/usual suspects for a set to FedEx directly to Drexel Automotive. But they put me on alert - they want to give Faulkner a driving test, and the Dick Koch patented milk crate seat (TM) won't do. They want a bona fide seat. So, I spent today cleaning up and painting the front seat frame, even though I still have to replace two broken mounting bolts. I'll take care of that once Faulkner is home.

IMG_8328.JPG
Note to self: This is how the springs go. The "poor man's bead blaster" to the rescue in cleaning these up!
IMG_8340.JPG
It was mild today - cooler in the Faulkner garage than outside! A little heater help with drying the paint
IMG_8342.JPG
Seat frame all spruced up


Tomorrow night I'll slap everything back together, and deliver Tuesday morning to the shop.
"If it's new, Image Plymouth's got it!"

User avatar
Faulkner
Posts: 3712
Joined: Sun Mar 07, 2004 6:59 pm
Location: Upper Darby, PA
Contact:

Re: Faulkner gets a Redo

Post by Faulkner » Mon Dec 03, 2018 9:37 pm

What the hell - might as well drill the bolts out now, right?

IMG_8351.jpg
No square pegs in these round holes - 5/16" cap bolts will do
IMG_8354.JPG
Glad I took pichuhs of the springs
IMG_8355.JPG
all the pieces parts back together
IMG_8356.JPG
The Plymouth seat goes to the shop in a Chebbie?!? Oh, the ignominy...


Bernbaum was fresh out of the brake retainer springs, so I had to go to Kanter - it cost me as much to overnight them, as it did to buy them, but it's done; they should arrive tomorrow. Tomorrow morning, I'll drop off the seat at the shop for them to bolt in for a test drive. If I can nab some pix, I will.
"If it's new, Image Plymouth's got it!"

User avatar
Dick Koch
Posts: 2152
Joined: Sat Jan 21, 2006 4:03 pm
Location: Palm Beach Gardens, Fl.
Contact:

Re: Faulkner gets a Redo

Post by Dick Koch » Tue Dec 04, 2018 6:41 am

Those square holes are designed for carriage bolts that have a square under the head!
Dick
Life is Beautiful! Sex, Beer & Mopars.

User avatar
Faulkner
Posts: 3712
Joined: Sun Mar 07, 2004 6:59 pm
Location: Upper Darby, PA
Contact:

Re: Faulkner gets a Redo

Post by Faulkner » Tue Dec 04, 2018 7:29 am

I know they are, Dick - but did you ever try to punch one out?!? They won't go. I just drilled through it; and I don't own a drill that drills square holes. Maybe for Christmas. :roll:
"If it's new, Image Plymouth's got it!"

User avatar
Dick Koch
Posts: 2152
Joined: Sat Jan 21, 2006 4:03 pm
Location: Palm Beach Gardens, Fl.
Contact:

Re: Faulkner gets a Redo

Post by Dick Koch » Tue Dec 04, 2018 2:11 pm

They make em you know, google it.
Dick
Life is Beautiful! Sex, Beer & Mopars.

User avatar
Faulkner
Posts: 3712
Joined: Sun Mar 07, 2004 6:59 pm
Location: Upper Darby, PA
Contact:

Re: Faulkner gets a Redo

Post by Faulkner » Tue Dec 04, 2018 4:09 pm

I'll be danged! A combined auger/chisel. That's pretty spiffy! I learn a lot from hanging out with old Ace Hardware guys.
"If it's new, Image Plymouth's got it!"

User avatar
william0431
Posts: 212
Joined: Tue Apr 12, 2016 5:41 pm

Re: Faulkner gets a Redo

Post by william0431 » Wed Dec 05, 2018 1:41 am

Dan, the seat hardware is looking good as new, whats the plan for the upholstery and door panels?

User avatar
Faulkner
Posts: 3712
Joined: Sun Mar 07, 2004 6:59 pm
Location: Upper Darby, PA
Contact:

Re: Faulkner gets a Redo

Post by Faulkner » Wed Dec 05, 2018 7:29 am

Thanks Will! The upholstery and door panels aren't original, but still in very good condition - and they pay homage to the form of the original. But a red interior in a bronze car won't cut it, so I'll be painting them with vinyl paint, black with bronze accents. When the weather warms back up again! :o :D

IMG_0102.JPG
"If it's new, Image Plymouth's got it!"

User avatar
Faulkner
Posts: 3712
Joined: Sun Mar 07, 2004 6:59 pm
Location: Upper Darby, PA
Contact:

Re: Faulkner gets a Redo

Post by Faulkner » Fri Dec 07, 2018 9:12 am

The brakes are done, they were working on the exhaust yesterday. They're working from the rear forward (because they have to make up the lead pipes), and they wanted to know the placement of the tailpipes. There's no bumper to guide them! I sent the following two pix of a fellow member's car (guess who), and offered to bring the bumper over - but they said no need, the pix tell the story. Thanks Dick!

IMG_8363.JPG
IMG_8364.PNG


They put the seat in, maybe Faulkner will get his road test today and come home tomorrow.

If I pay up, that is. :? :o Ka-ching, Ka-ching!
"If it's new, Image Plymouth's got it!"

User avatar
Faulkner
Posts: 3712
Joined: Sun Mar 07, 2004 6:59 pm
Location: Upper Darby, PA
Contact:

Re: Faulkner gets a Redo

Post by Faulkner » Fri Dec 07, 2018 1:44 pm

Not having any toys to play with, I spent some time in the garage tidying up and vacuuming. It sure is lonely in there...

IMG_8370.jpg


(*sigh*...) And no Martha parked in the driveway. Will they be home for Christmas? Or only in my dreams?

Hit it, Frank.

I'll be home for Christmas
"If it's new, Image Plymouth's got it!"

User avatar
Mark Merritt
Posts: 451
Joined: Sun Sep 23, 2012 5:57 pm

Re: Faulkner gets a Redo

Post by Mark Merritt » Fri Dec 07, 2018 8:19 pm

Dan; I had the same exhaust tip question when I did mine. I went with straight out the back only because I was, and already had exhaust tips. Otherwise I would have gone the way Dick did his, it looks great. To each his own. I have seen some angle to each side as well. As for the empty garage that is only temporary, sit A spell and have A Yuengling or two. Later Mark. P.S. President George H W Bush's funeral train (locomotive) is an EMD SD 70 AC They go back to the early 90's when they went from DC to AC traction motors. It was General Motors answer to G.E.'s Dash 9 They look similar to ours. We did A presidential locomotive in the early 70's, don't know what become of it ?
IMG_0006.JPG
ONLY ORIGINAL ONCE!!!!!

User avatar
Faulkner
Posts: 3712
Joined: Sun Mar 07, 2004 6:59 pm
Location: Upper Darby, PA
Contact:

Re: Faulkner gets a Redo

Post by Faulkner » Fri Dec 07, 2018 9:01 pm

Those tips look sweet, Mark! Yeah, for activities of longer duration - like, waiting and waiting - I switch to shiraz timers. They help me forget all sense of time... :cry:

I saw pictures of 4141 going by the crowds... Pretty impressive.
"If it's new, Image Plymouth's got it!"

Post Reply

Return to “Rebuilds”

Who is online

Users browsing this forum: No registered users and 1 guest