Search found 522 matches
- Mon Jul 13, 2020 9:12 pm
- Forum: Tech Support
- Topic: Can only go in reverse, stuck brake cable?
- Replies: 3
- Views: 2408
Re: Can only go in reverse, stuck brake cable?
The front brakes are directional as they energize going forward. try backing the shoes off a little bit and see if the problem improves. if not, you will be pulling the drums, for inspection and clean up. let us know what you find. Rick
- Tue Jun 30, 2020 9:28 pm
- Forum: Tech Support
- Topic: Cannot get tranny out of neutral
- Replies: 25
- Views: 12680
Re: Cannot get tranny out of neutral
Good Job! The 59 A 466 transmissions have two different valve bodys, the better is the one like the 60 or one piece, like you have. I personally would not have had any problem reusing the shift cable again. That being a' Known good part' is definitely a better choice. Good luck in the future, be su...
- Tue Jun 16, 2020 9:14 pm
- Forum: Tech Support
- Topic: Cannot get tranny out of neutral
- Replies: 25
- Views: 12680
Re: Cannot get tranny out of neutral
Good to see the problem is found. Do you know the cause? How long is your shift cable?
- Mon Jun 15, 2020 9:48 pm
- Forum: Tech Support
- Topic: Cannot get tranny out of neutral
- Replies: 25
- Views: 12680
Re: Cannot get tranny out of neutral
Wish I was there... My sister said ' I am so used to how things work, I would make a horrible teacher'. What ever that means? 1 Clean the cable adjuster wheel at the transmission, remove the lock bolt and pull the cable out of the transmission housing, making the shift detent go to first gear. 2 If...
- Mon Jun 15, 2020 1:01 pm
- Forum: Tech Support
- Topic: Cannot get tranny out of neutral
- Replies: 25
- Views: 12680
Re: Cannot get tranny out of neutral
The cable connection was used from 1956 to 1965. I used a pocket screw driver to unclip the 'Hairpin' on the connector to release the 'Shift Cable'.top two are 1956 powerflite but the connection is the same 'Hairpin spring wire'. last picture is 1962 to 1965 showing virtually the same connection.
- Mon Jun 15, 2020 11:05 am
- Forum: Tech Support
- Topic: Cannot get tranny out of neutral
- Replies: 25
- Views: 12680
Re: Cannot get tranny out of neutral
looks good, just confused with picture #2 I see feet and can't scale if this is debris or what. think the description of the cable release being a 'Hairpin' is pretty good. Do you have a Factory service manual? I have even used the local library to research this type of thing.... Amazing what you c...
- Thu Jun 04, 2020 11:16 pm
- Forum: Tech Support
- Topic: Cannot get tranny out of neutral
- Replies: 25
- Views: 12680
Re: Cannot get tranny out of neutral
Don, First try removing the small bolt on the adjusting wheel using 7/16 wrench or socket, on the transmission and pulling the cable shield back, there may be enough room to insert an awl or small screw driver and unclip the spring that hold the cable end. if it releases the end, you can check cabl...
- Wed Jun 03, 2020 6:04 pm
- Forum: Tech Support
- Topic: Cannot get tranny out of neutral
- Replies: 25
- Views: 12680
Re: Cannot get tranny out of neutral
I would have to guess that the internal rooster comb inside the transmission is in the neutral position being you could start the engine. I feel the cable some how came has come loose from one end or the other. I just worked on a pushbutton controlled Torqueflite last Thursday and the cable came lo...
- Thu Dec 26, 2019 6:59 pm
- Forum: How To
- Topic: Starter Motor Repair
- Replies: 1
- Views: 3325
Re: Starter Motor Repair
I used this informative link to rebuild a starter for a new project. Great information. My splint was screw in, and essentially the same. when done I found out I rebuilt the wrong starter. I now have a rebuilt 318 starter. Rick
- Sat Oct 12, 2019 8:06 am
- Forum: Rebuilds
- Topic: Faulkner gets a Redo
- Replies: 861
- Views: 577207
Re: Faulkner gets a Redo
Wow! Dan, Is this in your county? I have the luxury of being by our county air port and see many 'war birds' flying overhead. Enjoy the show. Wish I were there.Post Script The RAF Red Arrows were just here and put on quite a show.
- Sun Aug 04, 2019 10:28 pm
- Forum: Much Ado About Nothing
- Topic: Cam specs???
- Replies: 1
- Views: 3671
Re: Cam specs???
I wish I would have seen this post earlier... I think you would like the Sealed Power Cam CS 327 the specs are the same as the later 361 and 413 engines. slightly hotter than the 59 spec and better economy and power. sounds great, like the original.
- Tue Jul 09, 2019 6:57 pm
- Forum: Tech Support
- Topic: Head Gasket ?
- Replies: 17
- Views: 10293
Re: Head Gasket ?
Being it is one bank and you have a dual plane manifold...I suspect your intake is loose/leaking at the head on that bank. Even if from the crankcase side,
- Sun Jun 23, 2019 6:33 pm
- Forum: Rebuilds
- Topic: Faulkner gets a Redo
- Replies: 861
- Views: 577207
Re: Faulkner gets a Redo
The windshield washer pump with the switch to activate wipers... I honestly have never seen any like it.
- Sat Jun 22, 2019 9:44 pm
- Forum: '59 Plymouths for Sale
- Topic: John Quinn's Belvedere convertible up for sale on eBay
- Replies: 4
- Views: 7851
Re: John Quinn's Belvedere convertible up for sale on eBay
Went to breakfast with John Q. He said the new owner and friend were driving the Frau down to Houston today. Staying on continent anyway
An adventure they will enjoy, the weather was cool and threatening to rain.
An adventure they will enjoy, the weather was cool and threatening to rain.
- Sat Jun 08, 2019 8:17 pm
- Forum: '59 Plymouths for Sale
- Topic: John Quinn's Belvedere convertible up for sale on eBay
- Replies: 4
- Views: 7851
Re: John Quinn's Belvedere convertible up for sale on eBay
Frau Blucar Van nuys.jpg Wow! I can't believe John is selling 'Frau Blucar' , I went with John Q. to the Spring Fling in Van Nuys, California, and cruised with John to Malibu twice, enjoyed every minute, this vehicle performed flawlessly, being the passenger I was able to relax and enjoy all scener...