'59 Plymouth Forum

Frau Blu-car is beautiful Lookin good, hope some clips are at Carlisle.

The post cars were lighter and stronger than the other models. Most of the sedans were not considered as desireable as the hardtop and convertibles so they were surplused earlier. Drag racing did very little to the affect their dissapearance. Now we love to see the sedans because they are now a rare...

I was high bidder for 0 seconds.

If you need A/C Compressor brackets and aren't Too set on original MoPar, The sight I am going to list has bracketry for old A engine and B engine to use the modern Sanden compressors that are light and draw less HP and are 134 A compatible out of the box. They have line adapters and all other compo...

Dan; The MoPar Performance or Direct Connection high volume fuel pumps work great, A engine P4007040 and B engine P4007039.
These look exactly like the originals.

If your parts are good , torsion bar adjustment and a front end alignment here in Colorado would cost at the most $75. Our Chrysler house will be a little higher at times. I do business with a Goodyear shop by where I work. Being I have done alignments I prefer the thrust angle style of aligning a ...

Still looking "Have cash will travel"

Rob; I really haven't had too much experience with the stuck push rod, I usually pull on the brake pedal ( brute force ) then I unbolt the cylinder from the firewall. If you have power brakes, be carefull, pull about a 1/4 inch and loosen the cylinder and shim between the cylinder and the firewall w...

Very nice! Happy Easter! and You also Bode..

Ron, I am high bidder on this same unit right now. listing also on ebay, Thanks for the information.

I was looking at Ebay and never found that link.

Would love to find RCA automotive record player, the player that holds about 14, 45 RPM Records or a Highway HiFi It doesn't have to be operable but be repairable.

Mark,The casting number you list is for a 318.

Sorry, I realize this was confusing, after reading again. I was trying to be informative on how to tell these things when the axle is assembled.Kind of a FYI for the readers. Yes your chuck is an open non-sure grip.